Boiling or Melting Point Apparatus

SSW MP1290 Boiling or melting point apparatus
  • Temp. Range : Ambient to 350ºC
  • Display : 4 Digits LED
  • Resolution : 1ºC
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor Sample Capacity : 3+1 provision for Samples (one 6mm) Test Tube, for the determination of Boiling Point & Melting Point.
  • Application Area : Miniature Furnace Module
  • Application : Suitable for Boiling & Melting Point Melting
  • View: Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “HOLD” key .
  • Heating Control: Microprocessor controlled closed loop PID, Automatic Ramp Rate of Heating
  • Ramp Rates : Auto Adjustable ( by selection, Low - Auto - High)
  • Power Supply: 230 V ± 10% AC, 50 Hz.
  • Dimension : 36 X 29 X 24 Cm.
  • Weight : 6 Kg.

  • Capillary columns offer several advantages over traditional packed columns, including higher resolution, increased sensitivity, and the ability to analyze small sample volumes. They also allow for faster analysis times and better peak shapes. These features make capillary columns widely used in analytical chemistry for separating and identifying components in complex mixtures.

    SSW-MP–1291 Melting/ Boiling Point Apparatus Suitable for Dark Colored / any colored samples.

  • Temp. Range : Ambient to 350ºC
  • Display: LCD, 16 X 2 Lines Alphanumeric.
  • Display Resolution: 0.1ºC Temp.
  • Sensor: Grade “A” PT-100, Platinum Sensor
  • Sample Capacity : 3+1 provision for Samples (one 6mm) Test Tube, for the determination of Boiling Point & Melting Point.
  • Application Area : Miniature Furnace Module
  • Application : Suitable for Boiling & Melting Point
  • Melting View: Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “HOLD” key & reading is protected from power failure till “RESET” is not activated
  • Control: Microprocessor controlled closed loop PID, Automatic Ramp Rate of Heating
  • Ramp Rates : Auto Adjustable ( by selection, Low - Auto - High)
  • Serial Interface: USB to PC
  • Memory: 100 Samples with Location
  • Power Supply: 230 V ± 10% AC, 50 Hz.
  • (Dimension : 36 X 29 X 24 Cm.)
  • Weight : 6 Kg.

  • SSW-MP-1292 Melting/ Boiling Point Apparatus Microprocessor Controlled Suitable for Dark Colored / any colored samples.

    The instrument basically consists of a Miniature Furnace with Automatic Ramp Rate of Heating, Microprocessor Controlled, Visual facility is provided through Magnifying display of melting operation under front & rear illumination controlled ( Light intensity adjustable ) with the help of magnifying glass. Melting point reading put on hold as soon as the melting of sample visualize, by activating to press the “MELT” key. The instrument gives audio & visual indications & reading is protected from power failure till “RESET” is not activated. The Furnace becomes off and the cooling fan ON automatically. Melting Temperature of the sample remains displayed on the panel till the “RESET” switch is operated. Suitable for Dark Colored / all kind or any colored Samples. Temp. effect on viscosity / flow points and molecular weights by Rast's method with suitable accessories can be measured.

    SPECIFICATION

  • Suitable for Dark Colored / any colored samples.
  • Temp. Range : Ambient to 350ºC
  • Display : 128 X 64 Graphical LCD Display
  • Resolution: 0.1ºC
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor
  • Sample Capacity : 3+1 provision for Samples (one 6mm) Test
  • Tube, for the determination of Boiling Point & Melting Point.
  • Application Area : Miniature Furnace Module
  • Application: Suitable for Boiling & Melting Point.
  • Melting View : Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “HOLD” key & reading is protected from power failure till “RESET” is not activated.
  • Microprocessor controlled closed loop PID, Multi selection Programable Ramp Rate Heating 2ºC to 40ºC/minute by UP/ DOWN keys, can be increased or decreased during running / operation and Auto selection is also provided
  • Serial Interface : USB to PC
  • Memory : 1000 Samples with
  • Power Supply Dimension Weight
  • : 230 V ± 10% AC, 50 Hz.
  • : 36 X 29 X 24 Cm.
  • : 6 Kg


  • SSW-MP-1293 Melting/ Boiling Point Apparatus Microprocessor Controlled SPECIFICATION SAME AS SSW-1292 WITH CAMERA ATTACHMENT AND TFT DISPLAY SCREEN TO VIEW SAMPLES IN CAPILLARIES WITH HIGH RESOLUTION CAMERA.

    Melting View with Camera
    Front & Rear Glare-free illumination and Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “S1, S2 & S3” key for each sample & reading is protected from power failure.

    All Models are Microprocessor Controlled. Automatic Ramp rate / PID technology. Auto gradient rate of heating control for high precision. “HOLD action (Melting Point Temp. achieved) is protected from power failure in all Models. Useful for Pharmaceutical Industry , Chemical / Plastic Industries etc.

  • Temp. Range: Ambient+5ºC to 350ºC
  • Display: 128 X 64 Graphical LCD
  • TFT Screen: High resolution camera for viewing capillaries.
  • Size: 36 X 29 X 30 Cm.

  • SSW-MP-1294 Melting/ Boiling Point Apparatus Microprocessor Controlled. Suitable for Dark Colored / any colored samples.

    Automatic Ramp Rate Heating. The unit consists of in built Motorized stirrer with variable speed control, glare free background illuminator and cylindrical silicon oil bath. The silicon oil bath consists of a plain cylindrical container of toughened glass having capacity of about 200 ml. It is top covered with a Teflon cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries and 6mm hole for Test tube Sample, for the determination of boiling point of any liquid . The apparatus can be used for determination of boiling points, Temp. effect on viscosity / flow points and molecular weights by Rast's method with suitable accessories.

    SPECIFICATION

  • Temp. Range: Ambient to 300ºC
  • Display : 4 Digits LED
  • Resolution : 1ºC
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor
  • Sample Capacity : 3+1 provision for Samples (one 6mm) Test Tube, for the determination of Boiling Point & Melting Point.
  • Application Area : Silicon Oil Bath (Made of high Temp. Toughened Glass)
  • Application: Suitable for Boiling & Melting Point
  • Motorized Stirring : A high quality Motorized propeller fifitted, instead of Magnetic Stirring ( due to de- magnetization of Magnetic Stirring Bead in high Temp. oil) for uniform Temp.
  • Melting View : Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “HOLD” key & reading is protected from power failure till “RESET” is not activated.
  • Temp. Control : Microprocessor controlled closed loop PID, Automatic Ramp Rate of Heating
  • Ramp Rates : Auto Adjustable ( by selection, Low - Auto - High)
  • Power Supply: 230 V ± 10% AC, 50 Hz.
  • (Dimension : 36 X 29 X 42 Cm.)
  • Weight : 15 Kg.


  • SSW-MP-1295 Melting/ Boiling Point Apparatus Microprocessor Controlled. Suitable for Dark Colored / any colored samples.

  • Temp. Range : Ambient to 300ºC
  • Display: LCD, 16 X 2 Lines Alphanumeric Display
  • Resolution : 0.1ºC
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor
  • Motorized Stirring : A high quality Motorized propeller fitted, instead of Magnetic Stirring ( due to demagnetization of Magnetic Stirring Bead in high Temp. oil) for uniform Temp..
  • Temp. Control : Microprocessor controlled closed loop PID, Automatic Ramp Rate of Heating Ramp Rates : Auto Adjustable ( by selection, Low - Auto - High)
  • Serial Interface: USB to PC
  • Memory: 100 Samples with Location.
  • Other Specifications same as SSW-1294

  • SSW-MP-1296 Melting/ Boiling Point Apparatus Microprocessor Controlled.Suitable for Dark Colored / any colored samples.

  • Selectable Ramp Rate Heating.
  • The unit consists of in built Motorized stirrer with variable speed control, glare free background illuminator and cylindrical silicon oil bath.
  • The silicon oil bath consists of a plain cylindrical container of toughened glass having capacity of about 200 ml.
  • It is top covered with a Teflon cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries and 6mm hole for Test tube Sample, for the determination of boiling point of any liquid .
  • The apparatus can be used for determination of boiling points, Temp. effect on viscosity / flow points and molecular weights by Rast's method with suitable accessories.

  • SPECIFICATION

  • Temp. Range : Ambient to 300ºC
  • Display: 128 X 64 Graphical LCD Display
  • Resolution : 0.1ºC
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor
  • Sample Capacity : 3+1 provision for Samples (one 6mm) Test Tube, for the
  • determination of Boiling Point & Melting Point.
  • Application Area : Miniature Furnace Module
  • Application: Suitable for Boiling & Melting Point
  • Motorized Stirring : A high quality Motorized propeller fitted stirring for uniform Temp., instead of Magnetic Stirring ( due to de-magnetization of Magnetic Stirring Bead in high Temp. oil)
  • Melting View: Front & Rear Glare-free illumination and Large Magnififier Microprocessor controlled closed loop PID, Multi selection Programable Ramp Rate Heating 2ºC to 40ºC/minute by UP/ DOWN keys, can be increased or decreased during running / operation and Auto selection is also provided. Temp. Control & Ramp. Rate Heating for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “HOLD” key.
  • Temp. Control & Ramp. Rate Heating: Microprocessor controlled closed loop PID, Multi selection Programable Ramp Rate Heating 2ºC to 40ºC/minute by UP/ DOWN keys, can be increased or decreased during running / operation and Auto selection is also provided.
  • Serial Interface: USB to PC
  • Memory: 100 Samples with Location
  • Power Supply: 230 V ± 10% AC, 50 Hz.
  • Dimension : 36 X 29 X 24 Cm.)
  • Weight : 15 Kg.

  • SSW-MP-1297 Melting/ Boiling Point Apparatus Microprocessor Controlled.Suitable for Dark Colored / any colored samples.

  • Suitable for Dark Colored / any colored samples. Specification same as SSW - 1296 with CameraieVw. Attachment and TFT Display Screen to view samples in capillaries with high resolution Camera.
  • Temp. Range: Ambient+5ºC to 300ºC.
  • Display: 128 X 64 Graphical LCD..
  • TFT Screen: High resolution camera for viewing capillaries.
  • Temp. Control & Ramp. Rate Heating: Microprocessor controlled closed loop PID, Multi selection Programable Ramp Rate Heating 2ºC to 40ºC/minute by UP/ DOWN keys, can be increased or decreased during running / operation and Auto selection is also provided. Sample should be transparent at the time of melting, not Suitable for Dark Colored Samples .

    OPERATION : Fully Automatic “Sample Fill and Forget” : All the selection of programming is fully protected from power failure including “HOLD” action of melting temperature. Once the start action is initiated, it will reach to find out the melting point of sample, even multiple time power failure.

    SSW-MP-1298 Melting/ Boiling Point Apparatus Microprocessor Controlled.

    Miniature Furnace Type, Temp. Range : Ambient to 350ºC Opto-coupled I.R. Transmission based. Only Crystalline sample ( Sample required to be transparent at the time of melting, not Suitable for Dark/ Colored Samples ).

  • Temp. Range: Ambient to 350ºC
  • Display: 3 Digits LED,
  • Resolution : 1ºC Temp.
  • Sensor: Grade “A” PT-100, Platinum Sensor
  • Sample Capacity: One Sample , Capillary
  • Dimension : 1.4 mm
  • Heating Area: Miniature Furnace Module
  • Application: Suitable for Melting Point only
  • Temp. Control: Auto Ramp Rate Heating 2ºC to 10ºC/minute ( through selection, Low- Auto-High)
  • Operation: Auto determination of Melting
  • Point Power Supply: 230 V ± 10% AC, 50 Hz.
  • Dimension : 30 X 30 X 15 Cm.
  • Weight : 5 Kg.

  • SS-MP-1299 Melting/ Boiling Point Apparatus Microprocessor Controlled. Miniature Furnace Type, Temp. Range : Ambient to 350ºC

    Opto-coupled I.R. Transmission based. Only Crystalline sample ( Sample required to be transparent at the time of melting, not Suitable for Dark/ Colored Samples ).

  • Temp. Range: Ambient to 350ºC
  • Display: LCD, 16 X 2 Lines alphanumeric
  • Display
  • Resolution : 0.1ºC
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor
  • Sample Capacity: One Sample ,
  • Capillary Dimension: 1.4 mm
  • Heating Area: Miniature Furnace Module
  • Application: Suitable for Melting Point only
  • Serial Interface: USB to PC
  • Memory: 100 Samples with Location
  • Operation : Auto determination of Melting
  • Point Power Supply: 230 V ± 10% AC, 50 Hz.
  • Dimension : 30 X 30 X 15 Cm.
  • Weight : 5 Kg.

  • SSW-MP-1300 Melting/ Boiling Point Apparatus Microprocessor Controlled.

    Graphical Display, Temp. Range : Ambient to 350ºC : Opto-coupled I.R. Transmission based. Only Crystalline sample( Sample required to be transparent at the time of melting.

  • Temp. Range : Ambient to 350ºC.
  • Display: 128 X 64 Graphical LCD Display.
  • Resolution : 0.1ºC.
  • Temp. Sensor: Grade “A” PT-100, Platinum Sensor .
  • Sample Capacity: 1 Sample , Capillary
  • Dimension 1.4 mm Application Area : Miniature Furnace Module.
  • Application: Suitable for Melting Point only.
  • Operation : Auto determination of Melting Point.
  • PC Interface: USB to PC
  • Memory: 1000 Samples with Location
  • Power Supply : 230 V ± 10% AC, 50 Hz.
  • Dimension : 36 X 29 X 24 Cm.
  • Weight : 6 Kg.

  • SS-MP-1301/1302/1303 Melting/ Boiling Point Apparatus Microprocessor Controlled.

    General Specification :

  • Temp. Range : Ambient to 300ºC, Temp.
  • Sensor : Grade “A” PT-100, Platinum
  • Sample Capacity : 3+1 provision for Samples (one 6mm) Test Tube, for the determination of Boiling Point & Melting Point
  • Melting View : Front & Rear Glare-free illumination and Large Magnifier for Stain free Observation of melting operation, Melting / Boiling point reading is to be hold on by activating the “HOLD” key.
  • Magnetic Stirring : A Magnetic ( Fitted with Magnetic Stirrer ) coupled Teflon Bead stirring for uniform Temp.
  • Power Supply : 230 V ± 10% AC, 50 Hz.
  • Dimension : 36 X 29 X 42 Cm.)
  • Weight : 15 Kg.
  • The silicon oil bath consists of a plain cylindrical container of toughened glass having capacity of about 200 ml. It is top covered with a Teflon cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries and 6mm hole for Test tube Sample, for the determination of boiling point of any liquid . The apparatus can be used for determination of boiling points, Temp. effect on viscosity / flow points and molecular weights by Rast's method with suitable accessories.


    SSW-MP–1301 Melting/ Boiling Point Apparatus Microprocessor Controlled.

  • Display: 4 Digits LED
  • Resolution: 1ºC
  • Temp. Control : Microprocessor controlled closed loop PID, Automatic Ramp Rate of Heating Ramp Rates : Auto Adjustable ( by selection, Low - Auto - High).
  • SS-MP–1302 Melting/ Boiling Point Apparatus Microprocessor Controlled.

  • Display : LCD, 16 X 2 Lines Alphanumeric,
  • Resolution: 0.1ºC Temp.
  • Control : Microprocessor controlled closed loop PID, Automatic
  • Ramp Rate of Heating Ramp Rates : Auto Adjustable ( by selection, Low - Auto - High)
  • Serial Interface: USB to PC
  • Memory : 100 Samples with Location.
  • SSW-MP–1303 Melting/ Boiling Point Apparatus Microprocessor Controlled.

    Microprocessor controlled closed loop PID, Multi selection Programable Ramp Rate Heating 2ºC to 40ºC/minute by UP/ DOWN keys, can be increased or decreased during running / operation and Auto selection is also provided. Temp. Control & Ramp. Rate Heating Display: 128 X 64 Graphical LCD Display Resolution: 0.1ºC Serial Interface: USB to PC Memory: 1000 Samples with Location.

    Looking an Adequate Solution for your Company?

    Contact us today for free conslutaion or more information.

    Get In Touch